|
Acoustical
|
|
|
Operating Frequency Range1 100 Hz - 18 kHz
Frequency Response2 110 Hz - 16 kHz ±4 dB
Phase Response 290 Hz - 16 kHz ± 45°
Linear Peak SPL3 104.5 dB, Pink noise
107.5 dB, B-noise
112.0 dB, M-noise
Coverage
|
|
|
Coverage 110° conical
Transducers
|
|
|
Low Frequency One 5-in cone driver
High Frequency One 0.75-in dome tweeter mounted concentrically
in WAVE guide in front of 5-in driver
Connector Panel
|
|
|
Audio/Power Connector Two 5-pin female Phoenix (one input and a hard wired loop-output)
Pinout Two pins for 48 DC power, three pins for balanced audio
Power Wiring Pin 1: DC Power (-)
Pin 2: DC Power (+)
Audio Wiring Pin 3: Audio shield, chassis/earth
Pin 4: Signal (-)
Pin 5: Signal (+)
LED Displays loudspeaker status
Input
|
|
|
Type Differential, electronically balanced
Impedance 10 k& OMEGA; balanced (AC Impedance)
Nominal Input Sensitivity -2.5 dBV (0.25 V rms, 1.00 V peak) continuous average is typically
the onset of limiting for noise and music where pink noise has 12 dB
peak-to-RMS ratio
Audio Input Source Audio source must be capable of producing +16 dBV (6.3 V rms, 9.0 V
peak) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker with a sine wave.
Amplifier
|
|
|
Type High efficiency Class D
Output Power4 220 W (440 W peak)
Cooling Natural convection through the metal enclosure
DC Power
|
|
|
48V DC Powered from Meyer Sound MPS-488HP Power Supply
Approved for Class 2 Wiring used in conjunction with MPS-488HP
Safety Agency Rated Operating Range5 48 V DC
Current Draw
Idle Current 0.16 A rms
Maximum Long-Term Continuous Current (>3 sec) 0.32 A rms
Maximum Instantaneous Peak Current 1.70 A peak
Meyer Sound Power Supply Required For information and specifications on the Meyer Sound MPS-488HP
IntelligentDC external power supply, refer to its datasheet.
Compliance
|
|
| |
|
Safety Agency certification: Standard for audio, video and similar electronic apparatus:
UL 60065, CSA C22.2 NO. 60065-03 (AMD 2),IEC 60065,IEC 62368-1 Fire Rated to UL Standard 2043, Product and Accessories Installed in Air-Handling Spaces
EMC Certification: CE and FCC Part 15 Emission Class B emission limits applied.
Maximum Cable Lengths6
|
|
|
|
|
|
|
Number of Maximum Cable Length (feet) - imperial
|
Maximum Cable Length (meters) - metric
|
|
|
|
Speakers 12 AWG
1 1800
2 900
3* 600
|
14 AWG 1125 550 375
|
16 AWG 700 350 237
|
18AWG 450 225 150
|
2.5 mm2 480 240 160
|
1.5 mm2 260 130
87
|
1.0 mm2
135 70 45
|
0.75 mm2
80 40 27
|
|
|
|
|
|