E 8:2 Power Amp Labgruppen

Product code: E 8:2      339,419     
4.67/5 in 3 times 
Lab Gruppen
  • E-8-2
  • E-8-2
  • E-8-2
  • E-8-2
  • E-8-2
E-8-2
E-8-2
E-8-2
E-8-2
E-8-2

$703.01-4%
$675.93
In stock
  • Warranty 24 months
ship note
Heavy / bulk items such as loudspeakers, digital mixers etc shipping via sea freight is recommended, contact [email protected] for more details
  • Price only applicable for overseas
  • Technical Support
  • Term of shipment: Ex-Works
  • Pick up at Hoang Bao Khoa LTD company
  • All shipping costs and risks, including export/import procedures, duty and others are on buyer’s account (Incoterm 2020)

Features

800 Watt Amplifier with 2 Flexible Output Channels for Installation Applications
Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
800 Watt Amplifier with 2 Flexible Output Channels for Installation Applications

Shipping informations

Length
59.10 cm
Width
42.30 cm
Height
16.30 cm
Weight
6.83 kg

Official Distributor Certificate


Product Features
 

  • 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost

  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs

  • Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel

  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization

  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems

  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance

  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions

  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles

  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads

  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch

  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning

  • Efficient cooling with temperature-controlled fan with front to back airflow

  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs

  • GPIO connector with power control and indication for further system integration

  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals

E Series E 8:2

E Series E 8:2

The E 8:2 has smart green credentials delivering low lifetime cost of ownership.

Energy Star Qualified

Energy Star Qualified

By maintaining very low current draw during operating cycles even at high output levels, and reduced power consumption during non-operational cycles, our Energy Star qualified products harness impeccable Lab Gruppen sonic performance and robust power output while meeting the rigorous efficiency requirements of current Energy Star certification standards.

Small in Size, Huge in Benefits

Small in Size, Huge in Benefits

Building on Lab Gruppen’s touring reputation for sonic excellence and rock-solid durability, E Series brings a competitive edge to the installation market by adding ultra-compact size, high operating efficiency, output configuration flexibility, and an unprecedented cost-benefit ratio.

At the heart of E Series is Lab Gruppen’s IDEEA (IntelliDrive Energy Efficient Amplifier) technology. Based around a patented Class D variant output stage, IDEEA produces high power levels with very low distortion while drawing minimal mains current.

Lab Gruppen’s proprietary Rail Sensing Limiter (RSL), also exclusive to E Series, greatly reduces signal clipping to ensure high quality audio output at all times. User configurable for Hi-Z (70 V) or Lo-Z, RSL senses rail voltages and optimizes each output for instantaneous load conditions. RSL settings also facilitate asymmetric loading of the channels to optimize performance and efficiency. Total available output power can be allocated among the channels as required by the application. This makes it possible, for example, to drive a small sub on one channel, a number of 70 V ceiling loudspeakers on the second channel.

Lab Gruppen Performance with Energy Star Compliance

Lab Gruppen Performance with Energy Star Compliance

Lab Gruppen’s IDEEA architecture secures full Energy Star compliance by combining net operating efficiency of greater than 80% with an auto-power-down feature. After 20 minutes with no input signal, the amplifier automatically switches to standby mode – with consumption of less than 1 W – and switches back on when an input signal returns. GPIO facilities enable third-party systems to remotely control and monitor power state via contact closure.

Smart Green Credentials with Our IDEEA Platform

Smart Green Credentials with Our IDEEA Platform

The now proven IntelliDrive Energy Efficient Amplifier (IDEEA) platform represents the latest evolution of our amplifier design philosophies, drawing from technologies in our flagship PLM Series, to create ingenious contractor solutions with supreme green credentials.

Flexible Asymmetric Loading

Flexible Asymmetric Loading

Optimize performance and efficiency from each individual unit - allowing the total available output power to be utilized unequally between the channels, or for mono use with all power on a single channel. Enabling you to drive a small sub on one channel and a number of 70 V distributed ceiling loudspeakers on the other.

 

Specification

General

Number of amplifier channels

2

Max total output all channels driven

800 W

Peak output voltage per channel

100 V / 70 Vrms

Max. output current

16 Arms

Max output power (all channels driven)

2 ohms

400 W

4 ohms

400 W

8 ohms

400 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 200 W)

16 ohms

290 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)

70 V

400 W

100 V

Can deliver 400 W to a 100 V load tapped at 800 W

Performance

THD 20 Hz - 20 kHz at 1 W

<0.1%

THD at 1 kHz and 1 dB below clipping

<0.05%

Signal to Noise Ratio

>112 dBA

Channel separation (Crosstalk) at 1 kHz

>70 dB

Frequency Response

2 Hz - 40 kHz

Input impedance

20 kOhm

Common Mode Rejection (CMR)

50 dB

Output impedance

25 mOhm

Gain, Sensitivity and Limiters

Limit and gain switch defining limit and gain (per channel)

2 pos: Lo-Z and 70 V

VPL for 70 V mode

100 V

VPL for Lo-Z mode

56.6 V

Sensitivity for stated power into 4 Ohm in Lo-Z mode

4 dBu

Sensitivity for 70.7 V out in 70 V mode

4 dBu

Sensitivity for stated power into 2 Ohm in Lo-Z mode

1 dBu

Sensitivity for stated power into 8 Ohm in 70 V mode

2.1 dBu

Sensitivity for stated power into 16 Ohm in 70 V mode

3.7 dBu

Gain in 70 V mode

35.2 dB

Gain in Lo-Z mode

30.3 dB

Level adjustment (per channel)

Rear panel potentiometer, from -inf to 0 dB

Connectors and Buttons

Input connectors (per ch.)

3 - pin detachable screw terminals, electronically balanced

Output connectors (per ch.)

2 - pin detachable screw terminals

High pass filter

Fixed at 50 Hz, switchable per channel

Power control

Can be used to go between standby and ON

GPI (power control input)

Contact closure type, 2-pin detachable screw terminal, controls the power state

GPO (power state output)

Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state

Cooling

Single fan, front to rear airflow, no filter required, temperature controlled speed

Power

Nominal voltage

100 – 240 VAC

Operating voltage

70 – 265 VAC

Standby consumption

<1 W

Mains connector

IEC inlet

Dimensions

Dimensions

W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”)

Weight

Weight

4.2 kg (9.3 lbs)

Finish

Finish

Dark grey aluminum front and black steel chassis

Approvals

Approvals

CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star

 

$703.01-4%
$675.93
In stock
Only 4 left, order soon!
ship note
Heavy / bulk items such as loudspeakers, digital mixers etc shipping via sea freight is recommended, contact [email protected] for more details
  • Price only applicable for overseas
  • Technical Support
  • Term of shipment: Ex-Works
  • Pick up at Hoang Bao Khoa LTD company
  • All shipping costs and risks, including export/import procedures, duty and others are on buyer’s account (Incoterm 2020)

Contact

Business hours

Monday 7:30 AM - 5:00 PM
Tuesday 7:30 AM - 5:00 PM
Wednesday    7:30 AM - 5:00 PM
Thursday 7:30 AM - 5:00 PM
Friday 7:30 AM - 5:00 PM
Saturday 7:30 AM - 5:00 PM

FAQs

Does the company offer free shipping?

Free shipping for local order over $22. Oversea buyers will pay for shipping cost under Ex-work term.

E 8:2 has a discount?

Which brand does E 8:2 belongs to?

E 8:2 belongs to Lab Gruppen. Lab Gruppen, DSP combined amplifier (Power Amplifier) ​​from Sweden

How long is the warranty of E 8:2?

E 8:2 is 24 months of warranty.

Does HoangBaoKhoa support for installment?

Yes, installment payment via credit card.