Home Page » Line Array » Active Speakers - Line Array » HORIZON VHA 406ND Active Line Array Speaker 1600W 6.5inch FBT

HORIZON VHA 406ND Active Line Array Speaker 1600W 6.5inch FBT

Product code: HORIZON VHA 406ND 2,517

4.67/5 in 3 times

Price only applicable for overseas
Technical Support
Term of shipment: Ex-Works
Pick up at Hoang Bao Khoa LTD company
All shipping costs and risks, including export/import procedures, duty and others are on buyer’s account (Incoterm 2020)

Features

Imported from Italy

4 x 165mm (6.5 “) custom woofers with 38mm (1.5”) coil

Class-D 800Wrms for LF and 400Wrms for HF amplifiers

Constructed in 0.47’’ birch plywood with a tough and tour-ready synthetic rubber surround, each VHA406ND comprises four 6.5-inch woofers plus a 1.4’’ large format neodymium compression driver with a 2.5” voice coil.

CERTIFICATE

FBT distributor certificate

Product features

Multiple systems can be coupled:

Full coherence far beyond 18KHz
Particularly powerful, defined midrange with a frequency response extending from 65Hz to 20KHz.

The VHA406ND Class-D switch mode amplifier module can deliver:

800W for the LF section
400W for the HF section

Courtesy of an integrated DSP processor, with next generation algorithms, users whilst enjoying the system’s tremendous headroom to ensure the best possible audio fidelity.

Integrated hardware

Allows the linking of up to six VHA406ND cabinets in vertical array
With variable angles from 5° to 20° (in 5° STEPS)
Ensure of an easy and error-proof system configuration and set-up.

Rigging is simplified even further:

Inclusion of only one setting point per side.
All setting pins are fixed and integrated into the hardware
Elimination of both the risk of loss and damage in transport.

The integrated quick-release anchor points facilitate the creation of horizontal arrays using the dedicated flybar:

Each flybar will support up to three VHA406A cabinets
Multiple flybars can be joined for the creation of arrays delivering up to 360° coverage.

The FBT HORIZON VHA406ND provides a wide range of accessories:

Suspension, pole-mounting or ground-stacking.
Rrain cover that protects the electronic parts from the rain

IN SHORT

Bi-amplified 2-way line array
4 x 165mm (6.5 “) custom woofers with 38mm (1.5”) coil
Large format FBT waveguide with 90° (H) x 20° (V) dispersion
Frequency response from 65Hz to 20KHz
Class-D 800Wrms for LF and 400Wrms for HF amplifiers with switch mode power supply
Network interface TCP/IP - AES70 compatible
Ethercon RJ45 input and output for daisy-chain
Remote control by INFINITO System Management Suite
OLED DISPLAY and encoder with PUSH for easy onboard control
The front of the loudspeaker is covered with a powder coated perforated steel grille.

*The VHA406N has the same characteristics of the VHA406ND model but does not include the Dante feature

The purpose-designed central waveguide, optimized with BEM finite element simulators, offers dispersion of 90° horizontal and 20° vertical, with precise and focused vertical control across the enclosure’s entire operating range. The result is a combination of perfectly balanced, symmetrical dispersion.

The summit of the entire project is the 800+400W RMS amplification module with TCP/IP network interface. Based on the OCA ALLIANCE AES70 standard, the new HORIZON family receives 24-bit 48-96Khz digital audio streaming from all devices compatible with the DANTE standard and communicates with the INFINITO System Management Suite remote control software. The module is contained in an aluminium chassis with intelligent forced ventilation and is equipped with an OLED display with encoder for parameter setting and a high-brightness blue front LED allows remote identification of the device, also in daylight. Fully developed in house by the FBT R&D team, INFINITO is the revolution that enhances the user experience, reaching new heights in terms of performance and simplicity.

Technical Specifications

Built-in amplifier LF/HF: 800 / 400

Built-in amplifier peak LF/HF: 1600 / 800

Frequency response: 65Hz - 20kHz

Low frequency woofer: 4 x 6,5’’ / 1,5’’ coil

High frequency driver: 1 x 1,4’’ / 2,5’’ coil

Maximum SPL cont/peak: 128 / 133

Dispersion: 90°x20°

Input impedance: 22

Crossover frequency:

Ac power requirements: 640 VA

Input connector: XLR IN / OUT

Power cord: 5 / 16,4

Net Dimension (WxHxD): 612x360x397

Net weight: 68,34lb / 31Kg

Transport Dimension (WxHxD): 695x440x475 mm / 27.4x17.3x18.7 inch

Transport weight: 72,75lb / 33Kg

HORIZON VHA 406ND HORIZON series FBT Speaker Active Speakers Active Line Array Speaker FBT 6.5inch Speaker

Viewed products

HORIZON VHA 406ND Active Line Array...

2,518

Imported from Italy

4 x 165mm (6.5 “) custom woofers with 38mm (1.5”) coil

Class-D 800Wrms for LF and 400Wrms for HF amplifiers

Pre-order

View all

Price only applicable for overseas
Technical Support
Term of shipment: Ex-Works
Pick up at Hoang Bao Khoa LTD company
All shipping costs and risks, including export/import procedures, duty and others are on buyer’s account (Incoterm 2020)

Contact

028.73003875

[email protected]

Business hours

Monday	7:30 AM - 5:00 PM
Tuesday	7:30 AM - 5:00 PM
Wednesday	7:30 AM - 5:00 PM
Thursday	7:30 AM - 5:00 PM
Friday	7:30 AM - 5:00 PM
Saturday	7:30 AM - 5:00 PM

FAQs

Does the company offer free shipping?

Free shipping for local order over $22. Oversea buyers will pay for shipping cost under Ex-work term.

HORIZON VHA 406ND has a discount?

This price is the best to you now.

Which brand does HORIZON VHA 406ND belongs to?

HORIZON VHA 406ND belongs to FBT. FBT specializes in producing professional audio products such as high-power speakers, portable speakers, stage monitors, power amplifiers, and audio processing equipment. FBT's products are widely used in major music events and professional studios all around the world. To learn more about the FBT's history, please click the link below. FBT's History.