During use, your Turbosound iP2000 or iP3000 speaker may encounter issues such as unresponsive controls, intermittent sound, Bluetooth connection errors, or forgotten passcodes. Performing a reset is the quickest way to restore the system to its original stable condition. This guide provides detailed instructions for two reset methods - Soft Reset and Passcode Reset - allowing you to perform them easily on-site.
Soft Reset (Factory Reset via Setup Menu)
This method restores the speaker to factory defaults without hardware interaction and is suitable when the system is still operational.
STEPS:
-
Press the Setup button on the control panel.
-
Navigate to the Setup tab.
-
Scroll down and select Factory Reset.
-
Press the Encoder knob to confirm.
-
The speaker will automatically restart and return to its original factory settings.
After completion, the device will function like new, removing any user configurations or errors accumulated during use.
Reset When Passcode Is Forgotten
If you are unable to access the speaker due to a forgotten Bluetooth passcode, you can use one of the two options below.
Option 1: Reset via Mobile App
-
Open the Turbosound app on your smartphone (iOS or Android).
-
Connect to your iP2000/ iP3000 speaker.
-
In the app, select Unlock Speaker to bypass the passcode.
If this method does not work, proceed to the second option - Hardware Factory Reset.
Option 2: Hardware Factory Reset
This method completely restores the system, including the passcode and all user settings.
Steps:
-
Turn off the speaker.
-
Press and hold the Encoder knob while turning the power back on.
-
When the screen displays three options, select Factory Test.
-
The screen will flash blue and white for a few seconds.
-
Press the Encoder to start the reset process.
-
Follow the on-screen instructions until completion.
Once finished, the speaker will automatically restart, and all data - including the Bluetooth passcode - will be erased.
When to Reset Your Turbosound iP2000/iP3000
You should perform a reset if you experience any of the following:
-
The speaker is unresponsive or intermittently functional
-
Bluetooth connection fails or the device is not detected
-
Sound is unstable or cutting out
-
The Bluetooth passcode has been forgotten, preventing app connection
Resetting helps restore system balance, eliminate configuration errors, and enhance performance stability for live shows or event operation.
Conclusion
Resetting your Turbosound iP2000/iP3000 is a simple yet highly effective way to ensure smooth and reliable operation. Whether through a soft reset via the menu or a hardware reset when the passcode is lost, both methods will quickly restore your speaker to optimal working condition.