The new stereo kit includes a pair of SwiftShield shock mounts and pop filters along with a stereo mounting bar, providing a wide range of setup options. And for a mic that compares favorably to some of the world’s most revered (and expensive) vintage mics, we believe this new stereo kit is the best value on the market for professional audio recording.
The Aston Sound
From the very beginning of the ‘Aston project’ we have collaborated with some of the industry’s leading audio experts to create a tailored development board, we have focused on perfecting every little detail in our mics, to ultimately create what we believe to be the best products in their class.
Wave-Form Spring Head
The Aston Spirit has our signature wave-form spring head. This unique design not only looks great, but delivers an unprecedented degree of protection for the heart of your microphone, the capsule. The shock resistant wave-form design allows the head of the mic to distort if given a heavy knock, and then return to its normal position, without any damage. It also offers a degree of off-axis rejection, helping to eliminate unwanted artefacts from your recordings.
Built In Pop Filter
Aston’s vocal condenser microphones have an exclusive mesh-knit pop filter built into the wave-form head. The random weave allows sound to pass while drastically eliminating unwanted plosives at source. It also shields against multiple wavelengths of electromagnetic radiation making our microphones ideal in critically sensitive electronic applications. This completely encapsulating, single piece, mesh cage is formed in stainless steel, so won’t rust with use, and can even be removed and washed.
Direct to stand mounting
Yet another unique design element of the Aston Spirit is the use of custom moulded end caps with integrated XLR and universal stand thread adaptor. Because the internal shock absorption system is so good, you can mount the microphone directly to a stand via this built in thread and interchangeable thread adapter with outstandingly low handling noise. The design also makes Aston microphones extremely easy to repair and maintain.
Chassis
Part of the beauty of our microphones is the custom finish of each chassis. There are no mass-produced paint job finishes here… instead, each chassis is individually tumbled for up to 4 hours to give it a very hard-wearing, extremely beautiful, finish. To perfect the look, each microphone is separately engraved with its legends, and our brand mantra… ‘The Art of Audio’
PCB
A superbly balanced mix of discrete and integrated electronic circuitry
Harmonised circuit stage arrangement for easy integration from phantom power input circuitry to the capsule voltage bias
Novel non-linear voltage/current source rectification to provide controlled amplification and smooth/ clear audio output
Eco-Friendly Packaging
We have put our hearts and minds into creating the most beautiful performance pieces possible with each Aston product. When it comes to packaging we believe simplicity is king. Protective, re-useable, environmentally sensible packaging that doesn’t cost the earth.
Specifications
| Probe Type |
Capacitor |
| How sound works |
Pressure gradient |
| Frequency response |
20Hz – 20kHz (+/-3dB) |
| Equivalent noise level |
14dB A-Weighted |
| Sensitivity at 1kHz to 1kohm |
23,7mV/Pa |
| Maximum SPL for THD 0.5% |
138dB |
| Signal to noise ratio (relative 94dB SPL) |
80dB A-Weighted |
| Pole model |
Omni/Cardioid/Figure-of-Eight |
| Pad Switch |
-20dB/-10dB/0dB |
| Low cut filter |
80Hz |
| Product length |
175 mm / 6.89 in |
| Product Width |
54 mm / 2.13 in |
| Product weight |
625 g / 1.38 lb |