C 20:8X Power Amp with Network Lab.Gruppen

Product code: C 20:8X      595,204,532     
4.67/5 in 3 times 
Lab Gruppen
  • C 20-8X
  • C 20-8X
C 20-8X
C 20-8X

  • Price only applicable for overseas
  • Technical Support
  • Term of shipment: Ex-Works
  • Pick up at Hoang Bao Khoa LTD company
  • All shipping costs and risks, including export/import procedures, duty and others are on buyer’s account (Incoterm 2020)

Features

2,000 Watt, 8-channel amplifier with up to 250 Watts output per channel and NomadLink network for monitoring and control
Selectable gain plus scalable Voltage Peak Limiter (VPL) and bridge-mode operation allow custom configuration for any application
8 x
 2,000 Watt 8-Channel Amplifier with NomadLink Network Monitoring and Dedicated Control forInstall Applications
 

Official Distributor Certificate

Product Features 

  • 2,000 Watt, 8-channel amplifier with up to 250 Watts output per channel and NomadLink network for monitoring and control

  • Selectable gain plus scalable Voltage Peak Limiter (VPL) and bridge-mode operation allow custom configuration for any application

  • 8 x 250 Watts into 4 -16 Ohms low impedance or 70 V constant voltage

  • Proven and reliable Class-D output stage delivers sonic purity and efficiency

  • Power Factor Correction (PFC) and switch mode power supply reduces running costs and minimizes environmental impact

  • Intuitive DeviceControl software monitors and controls key functions via the NomadLink network

  • Comprehensive protection scheme including current, voltage, DC, temperature, short circuit and open load warnings

  • Fixed 35 Hz high pass filter, switchable per channel for sub sonic speaker protection

  • 8 x balanced analog audio inputs on 3-pin Phoenix* connectors

  • 8 x barrier strip 2-pole screw terminal output connectors

  • Removable dust filter grille for increased air circulation

  • Compact and durable 2U rackmount chassis saves space in install applications

  • GPIO connectors with power control and indication for 3rd party system integration

  • Universal power supply served through an IEC mains connector

C SERIES C 20:8X

C SERIES C 20:8X

The C 20:8X is the Most Powerful Eight-Channel Amplifier in the C Series Family.

The C 20:8X is the most powerful eight-channel amplifier in the C Series family, delivering an impressive 8 × 250 W* at 4 ohms, 8 ohms, 16 ohms or 70 Vrms; 500 W at 100 Vrms is available in bridge mode.

The C 20:8X is one of four C…X models in the C Series, each uniquely suited for a range of installed applications with relatively lower power output requirements. C…X models share most features of the original (higher power) C Series models, and they share the same compact, lightweight 2U chassis. However, the C…X models are offered in both four- and eight-channel versions, offering even greater channel density and installation flexibility. Also, because the unique benefits of Class TD® are more applicable at higher power levels, the C…X models employ a cost-efficient proprietary Class D output design. Other features unique to C…X models include a universal power supply, selectable 35 Hz high-pass filter, and built-in GPIO control facilities.

C 20:8X Series amplifiers are uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL™), which allows the output to be optimized for any loudspeaker load – whether a single large subwoofer or a series of small 70 V loudspeakers (100 V in bridge mode). VPL works in combination with adjustable input gain (adjustable in 4-channel blocks) to achieve maximum headroom regardless of input levels or output impedances. Additionally a 35 Hz high pass filter may be inserted in each 4-channel section.

Every C Series amplifier is ready for the NomadLink® network right out of the box. With NomadLink, key amplifier parameters are displayed via DeviceControl software, and remote control of channel mutes and power on/off is under network control.

GPIO facilities – provided exclusively on C…X models – allow access to key amplifier functions such as power on/off and fault reporting.

* Maximum continuous output power, all 8 channels driven, VPL set at 100 V and Gain set at 32 dB.

Specification

General

Number of amplifier channels

8

Peak total output all channels driven

2000 W

Peak output voltage per channel

100 V

Max output current per channel

8 Arms

Max output power (all channels driven)

16 ohms

250 W

8 ohms

250 W

4 ohms

250 W

2 ohms

125 W

Hi-Z per ch. (all ch.’s driven): 70 Vrms / 100 V peak

250 W

Max output power bridged

16 ohms

500 W

8 ohms

500 W

4 ohms

250 W

2 ohms

Not recommended 1

Bridged per ch.: 140 Vrms / 200 V peak

500 W

Performance

THD 20 Hz - 20 kHz at 1 W

<0.1%

THD at 1 kHz and 1 dB below clipping

<0.05%

Signal to Noise Ratio

>112 dBA

Channel separation (Crosstalk) at 1 kHz

>70 dB

Frequency response (1 W into 8 ohms) + 0 / -3 dB

6.8 Hz - 34 kHz

Input impedance

20 kOhm

Common Mode Rejection (CMR)

>50 dB, 20 Hz - 20 kHz

Output impedance @ 100 Hz

48 mOhm

Gain, Sensitivity and Limiters

VPL, selectable per ch 2

100, 63, 45, 32 V

VPL, when bridged 2 3

200, 126, 90, 64 V

Voltage Peak Limiter mode (per ch.)

Hard / Soft

Amplifier gain selectable (all channels) – rear-panel switches 3

29, 32, 35, 38 dB

Default gain

32 dB

Level adjustment (per channel)

Front-panel potentiometer, 21 position detented from -inf to

Connectors and Buttons

Input connectors (per ch.)

3-pin Phoenix, electronically balanced

Output connectors (per ch.)

Barrier strip 2-pole screw terminals

Output bridge mode

A+B, C+D, E+F, G+H, inputs A, C, E, G are signal source

High pass filter

Fixed at 35 Hz, switchable per channel

NomadLink network

On board, 2 x RJ45 connectors IN and OUT

Intelligent fans (on/off)

Yes, depending on presence of output signal

Power

Individual switches on front panel

Cooling

Two fans, front-rear airflow, temperature controlled speed

General Purpose Outputs (GPO)

Contact Closure types, 2-pole Phoenix

General Purpose Inputs (GPI)

Contact Closure types, 2-pole Phoenix

Front-panel user interface

Common

NomadLink Network; Power Average Limiter (PAL)4; Power on

Per channel

Signal present / High-impedance; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute

Power

Operating voltage, 230 V / 115 V nominal

Universal power supply 65-265 V

Minimum power-up voltage, 230 V / 115 V

80 V

Power Average Limiter (PAL) 4

Yes

Power Factor Correction (PFC)

Yes

Soft-start / Inrush Current Draw

Yes / max. 5 A

Mains connector

IEC inlet

Dimensions

Dimensions

W: 483 mm (19”), H: 88 mm (2 U), D: 343 mm (13.5”)

Weight

Weight

8.5 kg (18.75 lbs)

Finish

Finish

Black painted steel chassis with gray painted steel front

Approvals

Approvals

CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC

 

  • Price only applicable for overseas
  • Technical Support
  • Term of shipment: Ex-Works
  • Pick up at Hoang Bao Khoa LTD company
  • All shipping costs and risks, including export/import procedures, duty and others are on buyer’s account (Incoterm 2020)

Contact

Business hours

Monday 7:30 AM - 5:00 PM
Tuesday 7:30 AM - 5:00 PM
Wednesday    7:30 AM - 5:00 PM
Thursday 7:30 AM - 5:00 PM
Friday 7:30 AM - 5:00 PM
Saturday 7:30 AM - 5:00 PM

FAQs

Does the company offer free shipping?

Free shipping for local order over $22. Oversea buyers will pay for shipping cost under Ex-work term.

C 20:8X has a discount?

This price is the best to you now.

Which brand does C 20:8X belongs to?

C 20:8X belongs to Lab Gruppen. Lab Gruppen, DSP combined amplifier (Power Amplifier) ​​from Sweden

How long is the warranty of C 20:8X?

C 20:8X is 24 months of warranty.

Does HoangBaoKhoa support for installment?

Yes, installment payment via credit card.