HIMAXX 40A Processed Active Speaker 1250W RMS 12 inch FBT

Product Features

• A powerful dynamic design for aggressive clean-cut lines. A sturdy light-weight box that ensures great versatility and is ready for installation, thanks to its special mounting points and optional accessories. The asymmetrical design enables the enclosures to be used as stage monitors.
• A specially designed control panel ensures ease of use and intuitive control. Mic/line input, auxiliary stereo input with (HiMaxX 40a), 3-band EQ, ground-lift, diagnostic LED.
• Loudspeaker totally redesigned in collaboration with B&C. FBT studied and designed aspecial chassis, a more efficient ventilation circuit with a consequent reduction of 2dB “power compression”, a considerably stiffer cone to improve reliability and distortion and an even;more powerful neodymium magnet to increase control and efficiency. The voice coil has a diameter of 75 mm (3”) for higher power handling and reliability.
• B&C compression driver with a 25 mm (1’’) throat and 44 mm (1.7’’) coil (HiMaxX 40) for high power handling. Thanks to the use of a shorting copper cap, high frequencies are even more dynamic and crystal-clear.
• The development of the innovative amplifier is the result of years of research by the FBT R&D labs. It manages to combine the contrasting features of lightness, high power, efficiency and reliability, using the very latest technology. A switch mode power supply to reduce the weight and increase the power output velocity, a very high performance PWM amplifier for the low frequencies, to maximize the power fed out with minimum heat dissipation. A Class G amplifier for the high frequencies enables to achieve the audio quality of a Class A, with a much higher output.
• The silent preamplifier manufactured with SMD technology has the job of handling the equalization, 24dB/oct crossover, sophisticated protections, limiter and the commands of the control panel.
• The horn’s profile has been redesigned to ensure greater directivity control and lower distortion. The dispersion angle is 90°H x 60°V.
• Research work carried out with the university on the cabinet’s resonance and the fluid dynamics of the air led to the manufacture of a box in polypropylene with injection of absolutely inert GAS and efficient reflex ducts free from undesired turbulence

•  2-way, bi-amplified in Bass-reflex design 
•  B&C custom designed 320 mm (12”) neodymium woofer with 75 mm (3”) voice coil 
•  B&C 25 mm (1”) compression driver with 44 mm (1.7”) voice coil 
•  1000Wrms PWM LF power amplifier 
•  250Wrms Class G HF power amplifier 
•  Switch mode power supply for an excellent ratio weight/power 
•  Analog signal processor with limiter 
•  Completely redesigned control panel with:

Specifications