Source | Type: |
Optically Pumped Semiconductor Laser (OPSL) | Single colour GREEN laser projector |
Suitability: |
Permanent indoor / outdoor laser displays |
System control: |
FB4-SK [Ethernet, ArtNet, Autoplay | PC or Lighting Console]
|
Compliant with: |
EN 60825 |
Ingress protection rating: |
IP65 certified |
Weight [kg]: |
21 |
Size - laser projector [mm]: |
377 x 281 x 600 [WxHxD] [Technical Drawings are in the SUPPORT section of this page] |
Size - incl. bracket [mm]: |
377 x 447 x 726 [WxHxD] [Technical Drawings are in the SUPPORT section of this page] |
Guaranteed opt. output [W]: |
10 |
Green laser module [W]: |
10 | Coherent OPSL |
Wavelength [nm, ±5nm]: |
532 |
Beam size [mm]: |
5 |
Beam divergence [mrad]: |
<1 [full angle, *see note A below]
|
Modulation [kHz] | type: |
100 | analogue |
X-Y scanners: |
Juno 5 | 40 Kpps @ 8° [more options in UPGRADES section of this page] or without scanners, fitted with the Beam Expander |
Power requirements [V] | Input: |
100-230/50-60Hz |
Max. power consumption [VA]: |
600 |
Operation temperature [°C]: |
0-40 [currently being tested in the range -20 to +40 degrees] |
Included in Standard set: |
LogoLas laser system, flat surface bracket and wall mount bracket with fixings, 5M power lead, 5M Ethernet rj45 signal cable, E-STOP remote with 5M 3-pin XLR cable, set of 2 keys for the lid and 2 E-STOP keys, interlock bypass dongle [supplied for the USA only], USB memory stick with the user manual. Pangolin QuickShow laser control and creation software is available for FREE download.
Everything is safely packed and delivered in a plywood pallet export box. |
HW features: |
All the basic system settings and adjustments such as power output adjustment, X & Y axes invert, X & Y size and position, etc. are managed via the built-in FB4 control interface.
The laser system is equipped with a scanning system overload protection. |
Laser safety features: |
Keyed interlock, emission delay, magnetic interlock, scan-fail safety, fast electromechanical shutter [reaction time <20ms], adjustable aperture masking plate, Emergency STOP system with keyed remote and manual RESTART button. |
note A |
*The beam divergence total is calculated as an average arithmetic value of all individual colours. The divergence of each colour is calculated as:
1. FWHM of the beam cross-section for round beams, or
2. The arithmetic average of the beam's horizontal and vertical divergence for all rectangular beams. |