Sennheiser HD 400 PRO vs. HD 490 PRO: Which Studio Headphones Should You Choose?

16/11/2026    339    4.6/5 in 2 votes 
Sennheiser HD 400 PRO vs. HD 490 PRO: Which Studio Headphones Should You Choose?
Comparing the Sennheiser HD 400 PRO and HD 490 PRO in terms of sound quality, technical specifications, driver design, and their application for mixing and mastering in a studio environment.

Comparing Sennheiser HD 400 PRO and HD 490 PRO

The Sennheiser HD 400 PRO and HD 490 PRO are professional open-back headphones designed for mixing, mastering, and critical listening. Both feature dynamic drivers, a circumaural design, and a neutral sound reproduction approach, helping audio engineers evaluate mixes with accuracy.

The HD 400 PRO stands out with its angled transducers and lightweight construction. Meanwhile, the HD 490 PRO is developed with a Vibration Attenuation System, two specialized ear pad sets, and more precise low-frequency control.

1. Technical Specifications Comparison

Specifications HD 400 PRO HD 490 PRO
Acoustic Principle Dynamic, open-back Dynamic, open-back
Driver Size Not specified 38 mm
Frequency Response 6 Hz – 38 kHz 5 Hz – 36 kHz
Impedance 120 Ohm 130 Ohm
Sensitivity 110 dB SPL (1 Vrms) 105 dB SPL (1 Vrms)
THD < 0.05% < 0.2%
Weight (without cable) 240 g 260 g
Ear Pads Velour Mixing / Producing
Cable 1.8 m and 3 m 1.8 m

Note: The HD 400 PRO frequency response is specified at -10 dB. The HD 490 PRO frequency response is also specified at -10 dB under its respective measurement conditions. THD and sensitivity measurements also use different test conditions, so the figures should not be directly compared.

2. Key Technical Differences Between HD 400 PRO and HD 490 PRO

Driver Design and Sound Reproduction

The HD 400 PRO uses angled dynamic transducers designed to simulate the listening position of loudspeakers in a control room. Its open-back construction creates a wide soundstage, supporting the evaluation of stereo imaging, panning, and the positioning of sound sources within a mix.

Sennheiser HD 400 PRO and HD 490 PRO comparison

The HD 490 PRO features a 38 mm dynamic driver combined with the Vibration Attenuation System, which helps reduce unwanted vibrations and resonances. This design focuses on accurate low-frequency reproduction, supporting bass control and critical mixing decisions.

Ear Pads and Mixing Applications

The HD 400 PRO comes with velour ear pads, designed to provide comfort during extended working sessions.

The HD 490 PRO includes two specialized sets of ear pads:

  • Mixing Ear Pads: Designed for detailed analysis, frequency balancing, and stereo image evaluation.
  • Producing Ear Pads: Designed for composition, music production, and audio monitoring workflows.

The interchangeable ear pads make the HD 490 PRO more versatile when switching between different studio workflows.

Impedance and Compatibility

The HD 400 PRO has an impedance of 120 Ohm, while the HD 490 PRO is rated at 130 Ohm. Both are suitable for audio interfaces, studio mixers, and headphone amplifiers with compatible output voltage capabilities.

When selecting compatible equipment, check the headphone output specifications to ensure sufficient headroom and an appropriate monitoring volume level.

3. Should You Choose the HD 400 PRO or HD 490 PRO?

  • HD 400 PRO: Suitable for mixing, tracking, and critical listening. Key advantages include its lightweight design, angled transducers, wide soundstage, and low THD under the manufacturer's specified measurement conditions.
  • HD 490 PRO: Suitable for mixing, mastering, and advanced music production. Its key features include the Vibration Attenuation System, two specialized ear pad sets, and precise low-frequency control.

Technical Note: Both models feature an open-back design and are not suitable for monitoring during vocal recording with a nearby Microphone or in environments requiring high noise isolation, as sound can leak from the earcups.

Hoang Bao Khoa – Official Sennheiser Store in Vietnam

Hoang Bao Khoa – Official Sennheiser Store in Vietnam

Hoang Bao Khoa is an authorized distributor of genuine Sennheiser products and the exclusive Sennheiser & Neumann warranty service center in Vietnam, providing authentic products and after-sales services in accordance with brand standards. For customers concerned about product authenticity and after-sales support, reviewing the warranty policy is an essential step before making a purchase. Choosing genuine products provides greater confidence in product ORIGIN and ensures access to applicable warranty benefits.

>> Discover Sennheiser Vietnam

CERTIFICATE