FAQs

Please Navigate to: http://www.tracktion.com/

Before you begin make sure you have the latest Drivers and Firmware installed which are downloadable from our website here: www.behringer.com/EN/Products/FCA1616.aspx(click the Downloads tab and scroll down).

It is possible to calibrate certain aspects of your Deepmind from the "System settings" menu. To get to the system Settings, Press the "GLOBAL" button until you arrive at this menu, and towards the bottom you should see the "CALIBRATE" option.

X-TOUCH - How do I enter the Self Test Mode?

Unfortunately no.

Some XENYX mixers come with a built in effects unit, here is a list of the effect presets installed on each unit: FX Series XENYX 1002FX- http://www.behringer.com/assets/1002FX_P0572_V_YY.pdf XENYX 1202FX- http://www.behringer.com/assets/1202FX_P0571_V_YY.pdf

The X32 application can be used to control the X-32 over a network. In order to achieve this, both the X32 and the computer you wish to control it with need to be connected to the same network. This can be achieved by either connecting them directly with an Ethernet cable, or by connecting them both to the same router.

Why can’t I hear the playback from my computer using the UMC404HD or UMC1820

How do I configure my XR18/X18 or MR18 to playback signal from my computer?

Using a TOSLINK cable, connect the ADAT in of your UMC1820 to the ADAT out of the additional device, and the ADAT out of the additional device to the ADAT in of the UMC1820.