Cable type
|
4 pairs of 0.57mm nominal diameter Category 6e solid high-density polyethylene insulation PVC sheathed double shielded twisted pair wire |
Cable No.
|
4PR S/FTP Cat6A
|
Type
|
CAT6 SF/UTP Cable 23AWG *4PR
|
Spec.
|
23AWG
|
Structure
|
Item
|
Attribute or corresponding value
|
Implementation Standard |
1. Conductor
|
Conductor features |
Solid conductor should meet the requirements of TR type soft round copper wire in the standard. Stranded conductor |
GB/T3953-2009 |
Composition of conductor |
1× Φ0.55±0.02mm |
|
Conductor Material |
Bare copper wire |
YD/ T1019-2013 及 ANSI/TIA-568.2-D-2018
|
2. Insulation
|
Material |
HDPE |
Outside Diameter |
Φ1.3±0.05 |
Pair Color |
White and blue/Blue, white and orange/Orange, white and green/Green, white and brown/Brown |
Minimum insulation resistance at 20°C (MΩ/KM) |
≥5000 |
3. Jacket
|
Material |
PVC sheath material |
Color |
Gray |
Minimum Average wall thickness |
0.50 |
Outside Diameter |
Φ6±0.3 |
Bending Radius |
≥4D (cable outer diameter) |
Marking/Printing: Jinsanhu CM 4PR 23AWG 75℃ S/FTP CAT6A VERIFIED TO ANSI/TIA- 568.2-.D PVC --/--/--(YMD) |
4. Shield
|
Braid Tin-plated copper |
Φ0.10mmⅹ64 |
single sided aluminum foil |
4ⅹ0.025mm (conductive surface outward) Foil pair screen |
Single core conductor DC resistance |
≦9.5Ω/100 m(20°) |
5. Performance
|
Dielectric strength (between conductors) DC |
1min 1KV 或 2s 2.5KV |
Line pair to ground capacitance unbalance, maximum value, 0.8KHz/1KHz |
≦160pF/100m |
Minimum coupling attenuation |
≥41.0 dB/100m |
Shield continuity |
Electrically continuous |
Phase delay (250MHz) |
≦536 ns/100m |
6. Transmission Performance
|
Delay difference between pairs (>4MHz) |
≦45 ns/100m |
Attenuation (f=4-500MHz) (20°) |
≦45.3 dB/100m |
Near-end unbalanced attenuation (TCL) (f=1-250MHz) (20°) |
TCL≥26.0 dB/100m |
Near-end crosstalk attenuation (NEXT) 4-500MHz |
NEXT≥34.8 dB/100m |
Near-end crosstalk attenuation power sum (PS NEXT) 4-500MHz |
PS NEXT≥ 31.8 dB/100m |
Equal Level Far End Crosstalk Attenuation (EL FEXT) 4-500MHz |
EL NEXT≥20.0 dB/100m |
Equal level far end crosstalk attenuation power sum (PS EL NEXT) |
PS EL NEXT≥ 11.0 dB/100m |
Characteristic impedance (Zc) 4-250MHz |
100±15 Ω |
Return loss (RL) 20-250MHz |
RL≥17.3 dB |
Meet ROHS and REACH requirements |
conform to |
7. Environmental requirements
|
CCC certification |
N/A |
ROHS
REACH |
8. Safety certification
|
|
|
CCC |