Higher channel density with maximum signal reliability at the same time: Digital 6000 is intermodulation-free and assures through its equidistant frequency grid excellent spectral efficiency and the simplest frequency configuration—even in the toughest frequency environments where other systems already fail. Error correction and audio error masking recognize and fix problems long before they even become audible.
When it comes to setup and the user interface, the EM 6000 stands out for clarity, relevance and short pathways. Digital 6000 can be seamlessly integrated into existing digital or analog infrastructures. The EM 6000 receiver has a digital AES-3 output with word clock inputs and outputs, high-quality transformer-balanced analog XLR and 6.3 mm jack outputs as well as a 6.3 mm headphone output.
The Dante™ version with an Audinate Brooklyn II card additionally offers two Amphenol RJ-45 connectors for integrating the receiver into a Dante™ network, for redundant networks or daisy chain cabling.
Whether we're talking about reducing information down to the really meaningful key values or smart menus on a high-contrast OLED display, every operating element is a result of practical experience and designed for practical use. All the vital parameters are summarized in one view. Important functions can be reached directly via home screens without long navigation paths.
The auto-setup enables scanning and frequency distribution to all connected devices directly via the receiver. Naturally, Digital 6000 can also be monitored and configured via the Wireless System Manager (WSM). The EM 6000 is compatible with UHF Sennheiser Antenna systems.
Features
- 19'' 2-channel receiver, 19-inch 1RU
- Large 244 MHz switching bandwidth
- Legendary Long Range Mode (LR) with proprietary SeDAC audio codec from Digital 9000
- Link Density Mode (LD) with SePAC codec supports up to 5 channels per MHz
- Equidistant frequency grid for maximum channel density and simple setup
- 32 high-performance RF pre-selection filters
- Error correction and audio error masking
- AES-256 encryption
- Automatic frequency setup
- Digital and transformer-balanced analog outputs: XLR, 6.3 mm jack, AES-3, Dante with Brooklyn II card and Amphenol RJ-45
- Integrated antenna splitter for cascading up to 8 systems
- One OLED display per channel
- Link Quality Indicator (LQI)
- Compatible with Wireless Systems Manager (WSM)
- Compatible with standard Sennheiser UHF antennas
- Compatible with Digital 9000 transmitters in Long Range Mode
Top Specs
- Dimensions: 44 × 483 × 373 mm
- Audio Input: 2 × BNC (50 & OMEGA;)
- Audio Output: Analog XLR-3 and 6.3 mm transformer-balanced outputs per channel (-10 dBu to +18 dBu)
- Charging Time: BA 60: 80% in approx. 1:15 h; full charge in approx. 2:30 h
- Frequency Range: 470.000–714.000 MHz
- Latency: 3 ms (LR) / 3.2 ms (LD)
- Power Consumption: 85 W
- Sensitivity: -100 dBm typ.
- Connection: Wireless
Tech Specs
Logistics
Product
- Latency: Analog audio out: 3 ms (LR) / 3.2 ms (LD)
- Receiver Principle: Double superheterodyne
- Total Harmonic Distortion (THD): <0.03% (@1 kHz)
Frequency Specifications
- Frequency Range: 470.000–714.000 MHz
- Audio Frequency Response: LR Mode: 30 Hz–20 kHz (±1.5 dB)
Acoustic Properties
- Dynamic Range: 111 dB(A)
- Audio Output Level: XLR-3 and 6.3 mm transformer-balanced outputs, -10 dBu to +18 dBu
Connectivity
Inputs / Outputs
- Audio Input: 2 × BNC (50 & OMEGA;)
- Audio Output: Analog XLR-3 and 6.3 mm transformer-balanced outputs
Ambient Conditions
- Operating Humidity: Max. 85% at 40°C (non-condensing)
- Operating Temperature: -10°C to +50°C (14°F to 122°F)
Battery & Power
- Charging Time: BA 60: 80% in approx. 1:15 h; full charge in approx. 2:30 h
- Battery Included: No
- Power Consumption: 85 W
- Charging Voltage: BA 60/61: 4.2 V; BA 62/70: 4.35 V
Electrical Properties
- Sensitivity: -100 dBm typ.
Technology
- Network Protocol: IEEE 802.3 (1000 Mbit/s), shielded RJ-45
- Encryption: AES-256
- Codec: SePAC ( Sennheiser Performance Audio Codec)
- Transmission Method: Digital modulation, Long Range Mode (minimum frequency spacing: 400 kHz)
Dimensions
- Dimensions: 44 × 483 × 373 mm
- Weight: 5,200 g
- Height: 44 mm
- Length: 373 mm
- Width: 483 mm
What's in the Box
- 1 × EM 6000 Dante™ Receiver
- 3 × Mains cables (EU, UK or US plug)
- 2 × Antennas