-
Classic 1027 clocked sequential controller module from the '70s
-
Authentic reproduction of the circuitry from the "2500" Series
-
Contains an integrated circuit 8-step counter and 3 channels (A, B and C) of control voltages
-
8 rows of 3 controls provide 3 independently adjustable voltage outputs for each step of the counter
-
Built-in time base generator allows the sequencer to step automatically
-
Each row has an adjacent LED indicator to display the sequencer count
-
Illuminated push button is used to start and stop the internal clock
-
Rate of the internal clock can be adjusted from a stepping rate of 20 per minute to 400 per second by adjusting the Pulse Repetition Frequency control and the external rate control signal
-
Internal clock can be turned on and off by applying pulses on the appropriate input connections
-
Clock pulse width and duration of the step voltages is adjusted from 0 to 100% by the Pulse Width control and the external width control signal
-
With the clock turned off the sequencer may be stepped along and reset manually using the front panel push buttons
-
Control voltages on channel A, B and C range between 0 to 10 V
-
The 1027 can be used to control other 2500 Series modules including the 1026 Preset Voltages or 1050 Mix Sequencer modules
-
Cable connections are provided on the rear of the PCB for this purpose (cable included)
-
Eurorack specs: 26 HP, 50 mA +12 V, 30 mA -12 V