-
Pre-assembled ”SYSTEM 55“ modular synthesizer with 38 vintage sounding modules from the ’70s
-
1x 914 FIXED FILTER BANK with 12 active bandpass filters ranging from 125 Hz - 5.6 kHz and LP/HP filters
-
1x 923 FILTERS modules with 6 dB low and high pass filters and white/pink noise sources
-
1x 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 1x 904A VOLTAGE CONTROLLED LOW PASS FILTER
-
1x 992 CONTROL VOLTAGES module allows CV mixing and switching with 1 inverting attenuator
-
5x 902 VOLTAGE CONTROLLED AMPLIFIER with 3 summed CV inputs and dual audio inputs and outputs
-
4x 911 ENVELOPE GENERATORS with S-trig inputs and CV outputs
-
1x 911A DUAL TRIGGER DELAY module with S-trig input and output
-
2x 921A OSCILLATOR DRIVER with 6x 921B VCOs and 1x 921 VCO gives you 7 fully featured voices
-
1x 960 SEQUENTIAL CONTROLLER module provides up to 24-step sequences in 8 steps with 3 rows
-
1x CM1A MIDI to CV converter enables control by MIDI keyboards or DAW, V-trig or S-trig outputs
-
3x CP3A-O module allows CV mixing and switching for the VCOs with 1 attenuator
-
3x CP3A-M 4 input mixer with master level, 4 outputs and 2 sets of 4 multiples
-
2x 995 ATTENUATORS modules with 3 linked passive attenuators
-
1x 903A RANDOM SIGNAL GENERATOR module provides dual white and pink noise sources
-
1x CP35 ATTENUATORS module with 4 linked attenuators, 2 sets of 4 multiples and reference voltages
-
1x 961 INTERFACE module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
-
1x 962 SEQUENTIAL SWITCH module expands the 960 module into a 24 step sequencer
-
1x BP28, 2x BP56 and 2x BP2 blanks panels for a total of 144HP expansion space
-
1x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig or S-trig outputs
-
2x EURORACK GO cases including PSUs
-
2x EURORACK GO BRACKETS to link the 2 EURORACK GO cases together for easy patching