Ultra-low noise quad VCA and mixer module
Each VCA features manual Level control for independent mixing
Dedicated CV attenuators with dual LED's for monitoring of bipolar CV signals
Adjustable VCA response curve from linear to exponential
Each CV input is normalled to the adjacent input for cascaded control
Each output is normalled to the mix input of the adjacent output for cascaded control
Each VCA features a Boost switch for increased output level (6 dB)
16 controls and switches give you real-time access to all important parameters
Eurorack specs: 12 HP, 100 mA +12V, 100 mA -12V
The first synth modules came out in the 60s and tended to be extremely expensive. The FOUR PLAY is a modern compact and versatile module giving you four independent VCA’s which can also be used as a 4-channel voltage-controlled mixer for amazing flexibility. Modular synths were a landmark development in electronic music and today, it’s about to get better.
This is the Behringer FOUR PLAY. A high performance quad VCA and mixer module that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the FOUR PLAY in with your existing rig or start your modular synth journey from here. Either way you’re sure to have a lot of fun.
The FOUR PLAY is a feature rich quad VCA module with CV input attenuators, each with a bi-color LED to indicate CV input activity and polarity. Input boost switches add extra gain for lower level input signals. The curve controls allow you to setup the ideal CV response curve from fully exponential to linear, or any combination of the two. The level controls set the VCA gain and allow manual control of the signal output level, both when used as independent VCA’s or when used as a mixer. The VCA’s are DC coupled so can process both audio signals and CV signals.
The FOUR PLAY gives you comprehensive connectivity, 4 CV inputs for control or modulation of the VCA’s which are cascaded allowing all 4 VCA’s to be controlled by a single CV input if required. 4 signal input jacks with excellent headroom and the 4 VCA outputs are cascaded so that if only the 4/MIX output jack is used, the module becomes a 4-input voltage-controlled mixer, other combinations are easily selected according to which output jacks are inserted, such as a dual 2 input mixers for ultimate flexibility.
Installing the FOUR PLAY is easy as it is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows the FOUR PLAY to be mixed with other synth modules for a truly unique set up.
Whether you’re just getting into modular synths or looking to complete your collection, the FOUR PLAY from Behringer is a great tool to have when creating amazing music.
Get the FOUR PLAY from your local Behringer dealer today!
Show more
4 x 3.5 mm TS jacks,
DC coupled
> 1 MΩ,
unbalanced,
half normalled
10 V p-p
4 x 3.5 mm TS jack,
30 kΩ,
15 kΩ with boost enabled,
unbalanced
+19 dBu
100 Ω, unbalanced,
-92 dBu,
22 Hz-22 kHz
-98 dBu,
-97 dB at 1 kHz
-∞ to unity gain
Exponential to linear CV response
Adds +6 dB input gain
Green =positive CV,
Red =negative CV
Eurorack
100 mA (+12 V),
100 mA (-12 V)
5° C to 40° C
(41° F to 104° F)
60.6 x 129 x 41.3 mm
(2.39 x 5.08 x 1.63")
12 HP
0.14 kg (0.31 lbs)
Thanh toán được thực hiện một cách an toàn và bảo mật với thẻ tín dụng chuyển khoản Ngân hàng qua cổng thanh toán ONEPAY.
- Công Ty TNHH Hoàng Bảo Khoa & Showroom: 396-396A Lê Văn Lương, Phường Tân Hưng, Quận 7, Thành phố Hồ Chí Minh - MST : 0314628349 - Hotline: 028.73003875