FAQs

Explore the differences between Dante and AES67 - two widely used Audio-over-IP protocols. This article explains how each protocol works, their compatibility, advantages, and practical applications in professional audio systems, helping you choose the right solution for your setup.

This article provides a step-by-step guide to resolving Dante Clock Loss issues on Sennheiser devices. Learn about the common causes, how to check network configurations, upgrate firmware, and optimize your Dante setup to maintain stable clock synchronization across the entire network.

This article explains in detail the concept of antenna diversity in wireless microphone systems, including how to correctly position antennas and the recommended spacing according to Sennheiser’s guidelines. Proper antenna placement and diversity setup help ensure stable signal and minimize during reception operation.

This article provides guidance on troubleshooting RF interference in Sennheiser digital wireless microphone systems. It explains the main causes of RF noise, methods to minimize interference, and best practices for using microphones, transmitters, and cables correctly to maintain a clean and stable audio signal.

A detailed guide to identifying and eliminating hum or buzz in audio systems caused by ground loops. Learn how to verify grounding connections, use ground lift switches, isolate audio signals, and apply technical solutions such as ferrite beads and proper cabling practices to remove interference - ensuring clean and stable sound performance.

When installing or using the Neumann MA 1 Automatic Monitor Alignment software, many users may encounter the error “Audio Interface Not Displayed.” This issue is usually not serious and often occurs because the software cannot recognize the correct type of audio interface. The guide below explains the causes and how to fix them.

The Neumann V 402 is more than just a microphone preamplifier - it’s a central analog control hub engineered with precision in every detail. One of its most outstanding features is the integrated headphone amplifier, which allows musicians and engineers to monitor their signal with absolute zero latency. But why is this so important?

When stepping into the world of recording, one of the most important decisions you’ll make is choosing the right studio monitors. For many beginner producers, the Tannoy Reveal and Tannoy Gold Series are two of the most popular options. Both come from the legendary British brand, but they serve very different purposes and user levels.

In a small studio or home studio, studio monitors are essentially your “second pair of ears.” With Tannoy - the legendary British audio brand - choosing the right model not only ensures precise listening but also helps you unlock the full creative potential of your workspace.

While many producers spend tens of thousands of dollars building acoustically treated mixing rooms, RIME - Room Impulse Modeling Engine from Neumann is completely changing the game. Now, you can listen and mix as if you were sitting in a professional control room - using only a pair of headphones and the Neumann MT 48 audio interface.