Operation
Before connecting this unit to the mains power supply for the first time you must first fill the fluid tank with fog fluid and check that the nozzle is clean and unobstructed.
This fog machine has been designed to function on a mains power supply of either 120V-60HZ or 230V-50Hz and has been fitted with a suitable power plug for use with your local voltage.Check the label on the unit and the power plug for the correct voltage.
Place the machine on a level surface and loosen the cap of the fluid tank to fill with quality water based fog fluid. We recommend use of pointed fog fluid as it has been specially formulated for use with our foggers. Plug the remote control unit into the socket at the rear and switch on to allow time to preheat. Once the machine has reached temperature and is ready to operate the greed light on the remote control will illuminate. Push the button on the remote control when lit and hold for prolonged bursts of fog.
Always monitor fog fluid level as running the machine with no fluid could cause permanent damage.Please do not touch or place anything in close proximity to the nozzle during operation or preheat as there is a danger of burns.
It is normal for your fogger to have a recycling period after long bursts when the unit will shut itself down for a short period in order to heart up to temperature. During this time no fog can be produced. The green light on the remote will illuminate when the unit is ready for action again.
Due to the high operating temperature of fog machines it is advised that the effect be used in well ventilated aresas taking care not to obstruct the air vents. After use, allow time to 'cool' for safety before moving or touching.
Power Connections
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other connection be required they must be carried out with the following configuration.
Earth=Green/Yellow cable
Neutral=Blue cable
Live=Brown cable
In the USA & Europe, it is required that all plugs are 3-pin type I.e. with Earth/Ground connection.
In the UK, it is required that all mains plugs are fitted with 5A fuses.