All STX cable and chassis connectors are fully backwards compatible to conventional speakON connectors. In combination with with other speakONs the connection is not weatherproof.
Where can I obtain Faston tabs to wire speakON chassis connectors?
There are two Faston versions:
For the standard speakON series (except NL4MP-UC):
4.8 x 0.5 Fastons, just order NLFASTON
An isolated Faston can be ordered eg. at Tyco part # 9-160477-2
For the speakON STX series and NL4MP-UC:
6.3 x 0.8 mm Fastons, which can be ordered e.g. at Tyco part # 41829
How do I wire my cable onto my speakON?
The wiring of speakON connectors depends on the amplifier and/or loudspeaker system. Please see description below.
Which screws/rivets can I use for fastening of chassis connectors?
SCREWS
Screws for chassis connectors depend on panel material and panel thickness. We suggest the following:
Metal panel (Steel, Aluminum, Zinc)
Flat head thread forming screws, Pozidriv, DIN 7500 M, zinc plated, M3 x length (drilled hole ~ 3.1 mm)
Flat head metric machine screws, Pozidriv, DIN 965A, zinc plated, M3 x length (thread M3)
Plastic Panels
PT-flat head screws, WN 1413, zinc plated, KA30 x length (depends on material, ~ 2.4 mm)
For various chassis mount versions we offer correspondig screws. (A-Screw-1-8, B-Screw-1-8, E-Screw-1-12)
RIVETS
It is possible to use any aluminum 1/8'' or 3.2 mm 90° countersunk blind rivet. We suggest drilling a hole diameter of 3.3mm for the panel. It is possible to use pneumatic, electrical or hand riveting tools.
Does Neutrik offer a male cable connector for extension cables?
Yes, Neutrik offers the NLT4MX (speakON STX Series). Since all chassis connectors (in amplifiers or loudspeakers) are currently male connectors, a cable with a female connector on one end and a male connector on the other can only be used as an extension cables.
What is BI-AMP?
BI-AMP means the split of the frequency range to a low and high frequency. Therefore you need a 4-pole-cable and a 4-pole-speakON to transmit the 2 signals to the loudspeaker.
What is a speakON connector and what is it used for used for?
The speakON is a loudspeaker connector which is designed for highest mechanical and electrical loads and fulfil all safety standards. They are used to transmit high currents which occur for example at amplifier - loudspeakers lines. Due to speakON's mating mechanism arcing is prevented and electric shocks can not happen. The speakON connectors are UL-recognized and CSA-listed.
Attention: speakON is NOT to be used as an AC mains or power supply connector!