NSD1424BTN Tweeter Driver 1,4inch Neodymium 70W 8/16Ω 18 Sound

Product code: TWEETER NSD1424BTN 8OHM      7,330     
4.67/5 in 3 times 
18  Sound
  • Mặt trước
Mặt trước

$432.99-59%
$176.29
In stock
ship note
Heavy / bulk items such as loudspeakers, digital mixers etc shipping via sea freight is recommended, contact [email protected] for more details
  • Price only applicable for overseas
  • Technical Support
  • Term of shipment: Ex-Works
  • Pick up at Hoang Bao Khoa LTD company
  • All shipping costs and risks, including export/import procedures, duty and others are on buyer’s account (Incoterm 2020)

Features

Made in Italy
110 dB 1W / 1m average sensitivity
140 W program power handling
1,4 inches exit throat
64mm (2,4 in) edgewound aluminum voice coil
True Piston Motion TiN coated titanium diaphragm
Proprietary phase plug design
High grade neodymium magnetic structure
Excellent thermal exchange
The NSD1424BTN 1.4" exit neodymium high frequency compression driver has been designed for high level sound systems application. This new HF unit uses our proprietary True Piston Motion - TPM - technology, based on a thin film nitride coating deposit over the titanium diaphragm. The thin film is just several micron thick and is realized in a PVD - Physical Vapour Deposition - vacuum chamber. With its very high value of elasticity modulus (six times higher than titanium and two times higher than beryllium), the Tin coated Titanium diaphragm is capable of doubling the diaphragm overall stiffness with obvious benefits in terms of impulse response and intermodulation distortion reduction.

Shipping informations

Length
13.7 cm
Width
13.7 cm
Height
7.3 cm
Weight
1.938 kg

Official Distributor Certificate

The frequency response is then extended by 25%, showing a predictable, ideal pistonic behaviour, avoiding top-end spurious resonances. A proprietary treated Nomex bended former edgewound aluminum 60mm voice coil completes diaphragm assembly. It has been made joining the proprietary treated Nomex former directly to the titanium dome through its upper bend edge. In comparison with usual straight former joint, the driver design assures extended frequency energy transfer for improved response linearity and unparallel reliability. This feature allows to keep proper motion control of the dome in real working conditions. Thanks to its physical properties, the proprietary treated Nomex former shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, this material is suitable to work also in higher moisture contents environments. Equipped with Proprietary Phase Plug 3P architecture, the NSD1424BTN has been designed to give smooth coherent wavefront in the horn entrance in all working frequency range and high level manufacturing consistency. The phase plug with its short openings and high flare rate value assures low distortion and remarkable improvements in mid-high frequency reproduction. Through careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly able to reach 19K Gauss in the gap in compact and lightweight structure. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover that allows to obtain a lower power compression value.

Driver diagram

sơ đồ

Driver chart

biểu đồ

Specifications

thông số kỹ thuật

1. 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
2. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
4. Hight- pass filter 12 dB/oct

$432.99-59%
$176.29
In stock
ship note
Heavy / bulk items such as loudspeakers, digital mixers etc shipping via sea freight is recommended, contact [email protected] for more details
  • Price only applicable for overseas
  • Technical Support
  • Term of shipment: Ex-Works
  • Pick up at Hoang Bao Khoa LTD company
  • All shipping costs and risks, including export/import procedures, duty and others are on buyer’s account (Incoterm 2020)

Contact

Business hours

Monday 7:30 AM - 5:00 PM
Tuesday 7:30 AM - 5:00 PM
Wednesday    7:30 AM - 5:00 PM
Thursday 7:30 AM - 5:00 PM
Friday 7:30 AM - 5:00 PM
Saturday 7:30 AM - 5:00 PM

FAQs

Does the company offer free shipping?

Free shipping for local order over $22. Oversea buyers will pay for shipping cost under Ex-work term.

TWEETER NSD1424BTN 8OHM has a discount?

Which brand does TWEETER NSD1424BTN 8OHM belongs to?

TWEETER NSD1424BTN 8OHM belongs to 18 Sound. Eighteen Sound is a leading designer and manufacturer of high quality professional audio loudspeakers, developing state-of-the-art transducer technologies and using the most advanced production techniques, located in Reggio Emilia, Italy.

How long is the warranty of TWEETER NSD1424BTN 8OHM?

TWEETER NSD1424BTN 8OHM is 0 months of warranty.

Does HoangBaoKhoa support for installment?

Yes, installment payment via credit card.