With its custom design surround, the carbon fiber reinforced curvilinear ribbed cone assures smooth response and exceptional strength, with maximum reliability under high mechanical stress. The 75 mm state-of-the-art voice coil is similar to that of our 18LW1400 top-of-the-range model. It employs Interleaved Sandwich Voice coil (ISV), in which a high strength fiberglas former carries windings on both its outer and inner surfaces, resulting in a mass balanced coil and providing a uniform motive drive. This, in conjunction with the use of unique high temperature resin adhesives, creates an extremely linear motor assembly with a reduced tendency for break-up under hard drive conditions. Excellent heat dissipation has been achieved by incorporating air channels between the basket and the top plate. Maximum flux concentration and force factor in the gap is assured by the unique shape and design of the top and back plates, designed using our in-house Magnetic Flux FEA CAD resource. Due to the increasing use of high power audio systems at outdoor events or in marine environments, the ability to perform properly under inclement weather conditions is an essential part of the Eighteen Sound philosophy. This is achieved using an exclusive cone treatment which improves pulp strength and gives water repellent properties to the cone. In addition, a special treatment is applied to the top and back plates making the loudspeaker resistant to the corrosive effects of salts and oxidization. This treatment is more effective than after any other treatment in use today.
Driver diagram
Driver chart
Specifications
1. 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
2. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
4. Hight- pass filter 12 dB/oct