Acoustical
|
|
Operating Frequency Range1 60 Hz - 18 kHz
Frequency Response2 67 Hz - 16 kHz ±4 dB
Phase Response 190 Hz - 16 kHz ± 45°
Linear Peak SPL3 106.5 dB, Pink noise
109.5 dB, B-noise
114.0 dB, M-noise
Coverage
|
|
Coverage 100° conical
Transducers
|
|
Low Frequency One 8-in cone driver
High Frequency One 0.75-in dome tweeter mounted concentrically
in WAVE guide in front of 8-in driver
Connector Panel
|
|
Audio/Power Connector Two 5-pin female Phoenix (one input and a hard-wired loop output)
Pinout Two pins for 48 DC power, three pins for balanced audio
Power Wiring Pin 1: DC Power (-)
Pin 2: DC Power (+)
Audio Wiring Pin 3: Audio shield, chassis/earth
Pin 4: Signal (-)
Pin 5: Signal (+)
LED Displays loudspeaker status
Input
|
|
Type Differential, electronically balanced
Impedance 10 k& OMEGA; Balanced (AC Impedance)
Nominal Input Sensitivity -2.5 dBV (0.25 V rms, 1.00 V peak) continuous average is typically
the onset of limiting for noise and music
Where pink noise has 12dB Peak to RMS ratio
Audio Input Source Audio source must be capable of producing +16 dBV (6.3 V rms, 9.0 V
peak) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker with a sine wave.
Amplifier
|
|
Type High efficiency Class D
Output Power4 220 W (440 W peak)
Cooling Natural convection through the metal enclosure
DC Power
|
|
48V DC Powered from Meyer Sound MPS-488HP Power Supply
Approved for Class 2 Wiring used in conjunction with MPS-488HP
Safety Agency Rated Operating Range5 48 V DC
Current Draw
Idle Current 0.16 A rms
Maximum Long-Term Continuous Current (>3 sec) 0.78 A rms
Maximum Instantaneous Peak Current 3.10 A peak
Meyer Sound Power Supply Required For information and specifications on the Meyer Sound MPS-488HP
IntelligentDC external power supply, refer to its datasheet.
Compliance
|
|
|
Safety Agency certification: Standard for audio, video and similar electronic apparatus:
UL 60065, CSA C22.2 NO. 60065-03 (AMD 2),IEC 60065,IEC 62368-1 Fire Rated to UL Standard 2043, Product and Accessories Installed in Air-Handling Spaces
EMC Certification: CE and FCC Part 15 Emission Class B emission limits applied.
Maximum Cable Lengths6
|
|
|
|
|
Number of Maximum Cable Length (feet) - imperial
|
Maximum Cable Length (meters) - metric
|
|
|
Speakers 12 AWG
1 1200
2* 600
|
14 AWG 750 375
|
16 AWG 475 237
|
18 AWG 300 150
|
2.5 mm2 320 160
|
1.5 mm2
175
87
|
1.0 mm2
90
45
|
0.75 mm2
55
27
|
|
|