· Quick Start Guide, English
Cardioid-arrayable, front loaded dual 18" subwoofer for touring and installation applications
2,000 Watts continuous, 8,000 Watts peak power
Integral stacking feet and recesses facilitate secure ground stacking
Designed for ground stack use with MANCHESTER or LIVERPOOL line array elements
Seamless integration with Lab Gruppen amplifiers and Lake DSP for a complete system solution
Optimised tuning for extended low frequency impact and precise transient response
Flexible cardioid configurations and electronic delay steering provide superior rear rejection and pattern control
18 mm (3/4") Baltic birch enclosure with extremely durable semi matte black paint finish
Tour grade Neutrik SpeakON* STX NL4 rear panel connector for input connection
Front-mounted NL4 connector for rear-firing cardioid operation
The MS218 is a compact passive dual 18" 8,000 Watt (peak) subwoofer that is ideally suited for a broad range of speech and music sound reinforcement applications in both fixed, portable and touring audio systems. The MS218 is designed to work in conjunction with Lake DSP and Lab Gruppen amplification, providing optimal FOH performance, as well as considerable flexibility to readily adapt to varying venue requirements.
Turbosound is recognised the world over for designing and building some of the most iconic loudspeakers and subwoofers. We take meticulous care and pride in maintaining that reputation by utilising only drivers designed by ourselves or to our exacting standards.
The low distortion design utilised in the MS218 reinforces the bass musical instrument frequencies and steep cut-off slopes ensure an effective acoustic transition for use with MV212 line array elements. For low-frequency bass extension, the recommended cabinet ratio consists of one MS218 subwoofer per one MV212 element. For reverse cardioid subwoofer configurations, multiples of three MS218 enclosures are recommended with two front-firing enclosures and one rear-firing enclosure.
Finished in a ultra hard wearing polyurea black coating, the cabinet is constructed from 18 mm (3.4") and 21mm (1") birch plywood and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. The rear panel connector plate carries Neutrik speakON* NL4 connectors for input and link connections to additional enclosures.
With the ever increasing complexity of modern day line array systems. Seamless integration with the Lab Gruppen PLM+ is a prerequisite for the MANCHESTER series from Turbosound. Our engineers have prepared and meticulously designed a series of presets that will allow the user to achieve the maximum system performance and consistency possible. These can be found within the download section
EASE GLL files are provided for the EASE Focus Acoustics Simulation Software, which is available for free download. This allows accurate calculation of both acoustic coverage and selection of suspension pick point for tilting and aiming the array at the desired angle.
The loudspeaker shall be of the passive subwoofer type, consisting of two 18" (457 mm) LF drivers. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 30 Hz to 95 Hz and within -10 dB from 25 Hz to 115 Hz. Nominal dispersion shall be “half space.” Maximum amplifier output power shall be 4,000 Watts peak, Peak level at 1 m under half space conditions using pink noise with crest factor 4, with dedicated pre-set, shall be 145 dB. Dimensions: 568 mm high x 1050 mm wide x 800 mm deep (22.4 x 41.3 x 31.5"Net weight: 97 kg (213.85 lbs). The loudspeaker system shall be the TURBOSOUND MS218. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equalled or exceeded.
Thanh toán được thực hiện một cách an toàn và bảo mật với thẻ tín dụng chuyển khoản Ngân hàng qua cổng thanh toán ONEPAY.