D 200:4L Amply Công Suất Labgruppen DSP 4 Kênh

Mã sản phẩm: D 200:4L      9.903     
4.5/5 trong 16 lượt 
Lab Gruppen
  • D 200-4L
  • D 200-4L
D 200-4L
D 200-4L

252.000.000
Chờ đặt hàng
  • Miễn phí giao hàng toàn quốc

Tính năng nổi bật

4 x 4,400 Watts into 2 Ohms
4 x 5,000 Watts into 2.67 Ohms
4 x 4,400 Watts into 4 Ohms
4 x 1,150 Watts into 16 Ohms, 4 x 3,300 Watts into Hi-Z 70 V, 4 x 4,700 Watts into Hi-Z 100 V
1-Year Warranty
2,000 Watt Amplifier with 4 Flexible Output Channels, Lake Digital Signal Processing and Digital Audio Networking for Installation Applications

Thông tin giao hàng

Chiều Dài
#N/A
Chiều Rộng
#N/A
Chiều Cao
#N/A
Cân Nặng
#N/A

Tính năng sản phẩm

  • 20,000 Watt amplifier with 4 flexible output channels and up to 5,900 Watts channel output

  • Lake digital signal processing for unparalleled loudspeaker management and system control

  • Integrated 8x8 channels of dual redundant Dante* digital audio networking with AES67 support

  • 4 x 4,400 Watts into 2 Ohms, 4 x 5,000 Watts into 2.67 Ohms, 4 x 4,400 Watts into 4 Ohms, 4 x 2,300 Watts into 8 Ohms, 4 x 1,150 Watts into 16 Ohms, 4 x 3,300 Watts into Hi-Z 70 V, 4 x 4,700 Watts into Hi-Z 100 V

  • Proven and reliable Class-TD output stage with proprietary Intercooler high-efficiency cooling system

  • Rational Power Management (RPM) provides total flexibility to allocate available power across all 4 output channels

  • Best-in-class Power Factor Correction (PFC) with Current Draw Modelling reduces running costs and minimizes environmental impact

  • Under-Voltage Limiting (UVL) for continued operation during severe mains supply voltage drops

  • Dedicated on-board surveillance and load monitoring for mass notification applications

  • Redundant audio inputs and on-board system surveillance for voice alarm systems

  • CAFE (Configuring Amplifiers For the Environment) software for design, system planning, equipment planning, installation and commissioning

  • Control and monitoring integration with 3rd-party matrix systems including MediaMatrix* and Q-Sys* via dedicated interfacing software

  • Dedicated front-panel mute buttons for each amplifier channel with bicolour LED indication

  • 4 "Lake Class" analog input channels with Iso-Float ground isolation for reliable audio distribution

  • 4 input channels of AES/EBU (AES3) digital audio supporting all standard sample rates up to 192 kHz with 24-bit resolution

  • 2 Neutrik etherCON* RJ-45 ports provide dual redundant Dante interfaces and remote configuration via Lake Controller and Dante Controller software

  • Balanced analog and digital audio inputs and amplifier outputs on plug-in Phoenix* connectors

  • Detachable Neutrik powerCON* cable rated at 250 V / 32 A with variety of wall plugs selectable on order

  • Removable dust filter grille for increased air circulation and simple maintenance

  • Rugged 2U rackmount chassis including rear support brackets for ease of installation

D SERIES D 200:4L

D SERIES D 200:4L

D 200:4L Combines 20000 W of Flexible Power with the Latest Lake DSP, DANTE Digital Audio Networking and Advanced System Integrity Monitoring.

The D 200:4L is based on the same foundation of robust, high-power amplifier technologies as our renowned PLM Series – an amplifier platform with a proven record of reliability and sonic performance on the world’s most grueling concert tours and in
high-profile, large-scale installations.

With the D 200:4L, those same core technologies have been updated and refocused to provide the ultimate solution for the most demanding digitally networked installed sound applications – in stadia, arenas, theme parks, performing arts centers, racecourses and other large commercial sound installations.

In addition to legendary Lab Gruppen reliability and sonic excellence, the D Series incorporates newly refined outputs stage technologies along with installation-targeted hardware and software features that optimize amplifier system design and configuration. Together, these new technologies allow systems integrators to minimize both initial equipment costs and end users’ long-term energy consumption.

Rational Power Management (RPM)

Rational Power Management (RPM)

At the core of the D Series platform is Rational Power Management (RPM), a proprietary Lab Gruppen technology that allows system designers and integrators unprecedented freedom to allocate the output power available on each channel for optimum performance with specific load conditions. RPM technology also enables the integrator to minimize initial equipment costs and reduce rack space requirement since with conventional installation amplifiers, it is often necessary to “over-specify” amplifiers to meet the maximum power demand on one channel, leaving excess power capacity wasted on the remaining channels. RPM reduces costly excess capacity by allowing re-allocation of output power capacity among the four channels - with each channel on the D 200:4L capable of delivering up to 5000 W power output, leaving any remaining available power to be allocated for less demanding loads.

CAFE for Green Credentials

CAFE for Green Credentials

The D 200:4L can be configured and monitored using the new CAFE (Configuring Amplifiers For the Environment) software suite. In addition to providing comprehensive system surveillance and configuration of RPM features, CAFE includes an innovative design aid – the Equipment Specification Predictor (ESP) – that provides tools for optimum specification of D Series units. ESP examines the system and load requirements and then supplies recommendations for the installation that include model and quantity of D Series units, heat generated, channel distribution, and current draw. The end result is accurate mains management and precise specification of cooling systems and UPS, when required.

The Power of Lake Processing

The Power of Lake Processing

All D Series Lake versions provide extraordinary input flexibility, the legendary power of exclusive Lake processing algorithms, comprehensive control and load monitoring via Lake Controller, and seamless integration into Dante digital audio networks. In addition, by employing third-party middleware, D Series Lake versions can be integrated into on other widely used networked digital matrix systems. All three D Series Lake models incorporate four full-featured Lake Processing modules, with four discrete channels of audio throughput input to output. Audio signals are selectable from four channels of analog (each with exclusive Iso-float ground isolation), four channels of AES3 digital, and eight dual redundant Dante networked digital inputs. Input signals are individually selectable for each channel, with programmable failover to analog. The full-featured, on-board Lake processor includes group control with Raised Cosine™ MESA EQ™ asymmetric filters to match the responses of many loudspeaker systems. LimiterMax™ peak and RMS limiters set the industry standard for loudspeaker protection and sonic transparency.

Rational Power Management

Rational Power Management

RPM allows truly flexible allocation of the 20000 W of available power across all 4 channels of the D 200:4 to ensure the most efficient and rational use of amplifier inventory. With a each channel capable of up to 5000 W without bridging (losing channel count), leaving remaining power to be allocated across other channels as required, D 200:4 is capable of meeting the demands of all but the most power-hungry of performance install applications.

Lake Processing with DANTE

Lake Processing with DANTE

The robust power platform of D Series works hand-in-glove with dual integrated Lake Processing modules. Lake features such as Raised Cosine Equalization™, Limiter Max™ peak and RMS limiters, and Iso-Float™ ground isolation. AES3 digital and dual-redundant Dante networked inputs are standard for compliance in mission-critical PA/VA applications.

Real World Green Credentials

Real World Green Credentials

The combination of unique power supply technologies providing class-leading and predictable low current draw to power output, and innovative CAFE software enable better mains management and allow substantial savings to be made on critical infrastructure such as cooling and UPS systems, lowering the overall installation and running costs of a venue audio system.

 

Specification

General

Processing / Network

Lake / Dante

Number of amplifier channels

4

Total burst power all channels (share among channels with RPM)

20000 W

Max output power (all channels driven)1

2 ohms

4400 W

2.67 ohms

5000 W

4 ohms

4400 W

8 ohms

2300 W

16 ohms

1150 W

Hi-Z 70 V

3300 W

Hi-Z 100 V

4700 W

Max output power single channel (all models)1

2 ohms

4400 W

2.67 ohms

5900 W

4 ohms

4600 W

8 ohms

2300 W

16 ohms

1150 W

Hi-Z 70 V

3300 W

Hi-Z 100 V

4700 W

Amplifier output modules (all models, all channels)

Peak output voltage

194 V

Max. output current

67 A

Rational Power Management (RPM)

Regardless of model, any channel has potential to deliver the max single channel output power (1 channel on D 80:4, 2 channels on D 120:4)

Default voltage limitation (can be lifted with RPM configuration)

194 V

Protection features

Current Average Limiter (CAL), Very High Frequency Protection (VHF), Direct Current Protection (DC), Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection

Amplifier platform

Inter Sample Voltage Peak Limiter (ISVPL)

Configurable Peak voltage threshold and profile

THD + N at 1 kHz and 1 dB below clipping

< 0.04 %

Pilot tone generation and analysis

Yes

Load impedance analysis

Yes

Frequency response (1 W into 8 Ohm, 20 Hz - 20 kHz)

+/- 0.05 dB

Internal Sample Rate / Data path

48 / 96 kHz / 32 bit floating point

Product propagation delay AES 96 kHz / analog input

1.61 / 1.68 ms

Lake processing

Loudspeaker processing

Up to 4 modules of Classic/linear-phase/FIR crossover, EQ, delay, LimiterMax™ - peak and RMS limiters

System tuning

Group control with Raised Cosine™ MESA EG™ asymmetric filters

Input redundancy / Matrix

Automatic 4 level input redundancy / 4 input mixers

System integration

Comprehensive 3rd party protocol over UDP Ethernet

Dante Audio Network

Dante I/O

8 x 8

Network topology / redundancy

Flexible topology / Supports daisy-chained and Dual redundant networks

Sample Rates / Transport

48, 96 kHz / Uni + Multicast

Network latency

0.25, 0.5, 1.0, 2.0, 5.0 ms

AES Inputs

Inputs

2 AES inputs (4 audio channels)

Supported sample rates / resolution

44.1, 48, 88.2, 96, 176.4, 192 kHz / up to 24 bits

Sample rate conversion THD+N 20 Hz - 20 kHz unweighted

0.0000003

Analog Inputs

Inputs

4 high quality inputs with Iso-Float ground isolation

Maximum input / digital reference

+26 dBu / +21 dBu

Sampling rate / Resolution

96 kHz / 24 bit

Input impedance balanced / unbalanced

20 / 10 kOhm

THD+N (typical at 1 kHz unweighted)

0.0000022

THD+N (typical at 20 Hz and 20 kHz unweighted)

0.0000033

Back panel Interface

Analog inputs

4 x Terminal block connectors analog input with +, - and ground

AES inputs

4 x Terminal block connectors analog input with +, - and ground

Output connectors

4 x 2 pole Terminal block connectors rated at 1000 V / 76 A (exceeding amplifier capacity) Can take up to 16 mm2 (6 AWG) cables

Ethernet Ports

2 x EtherCon RJ45 100/1000 Base-T for the Lake Controller, Dante controller and/or DLM (3rd party protocol)

Detachable mains cord

Neutrik PowerCon rated at 250V/32A

Front-panel user interface

System status indication

3 x 3 colored LED. FRAME, TEMP, PSU for device status indication

Channel status indication

3 x 3 colored LED per channel. Status indication separated for channel LOAD, AMP, SIGNAL status

Mute

Per channel touch button for mute control and bicolored LED for indication

Power

Touch button for ON/STANDBY control and bicolored LED for power state indication

Select

Touch button and LED for bidirectional Device -Software select functionality

Mains Power

Nominal voltage

100 - 240 Volt AC 50 - 60 Hz

Operating voltage

70 - 265 V AC 45 - 66 Hz

Mains wall plug

Selectable on order CEE 7/7 “Schuko” 230 V / 16 A NEMA L5-30 “Twistlock” 125 V / 30 A NEMA 5-15P 125 V / 15 A (D 80:4 only) NEMA 5-20P 125 V / 20 A (D 120:4 only) NEMA 6-20P 250 V / 20 A AS/NZS 3112 230 V / 15 A (Aus/Nz) BS 546 230 V / 16 A (India) C-30P 125 V / 30 A (Japan)

Power supply features

Soft start / Inrush power

Yes/ Max 8 Ampere

Power factor correction

> 0.98 for mains power > 400 W

Regulated switch mode power supply (R.SMPS)

Yes

Breaker Emulation Limiter (BEL)

Configurable current threshold and breaker profile

BEL max current threshold

32 A

Power Average Limiter (PAL)

Yes

Under Voltage Limiter (UVL)

Yes

Mains undervoltage and overvoltage protection and mains glitch tolerance

Yes

Dimensions

Rack rail to rear panel

W: 483 mm (19"), H: 88 mm (2 U), D: 424 mm (16")

Overall depth front-rear support

D: 463 mm

Weight

Weight

16.5 kg (36 lbs)

Finish

Finish

Black painted steel chassis with grey painted steel front with detachable grille

Approvals

Approvals

CE, ETL(ANSI/UL, CSA), PSE, RCM

Sản phẩm khác

  • C 48:4 Amply Công Suất Labgruppen 4 x 1.200w / 4 Ohm 70V / 100V
  • C 16:4 Amply Công Suất Labgruppen 4 x 300w / 4 Ohm 70V / 100V
  • C 20:8X Amply Công Suất Labgruppen 8 x 250w / 4 Ohm 70V / 100V
  • D 200:4L Amply Công Suất Labgruppen DSP 4 Kênh
  • D 120:4L Amply Công Suất Labgruppen DSP 4 Kênh
  • D 80:4L Amply Công Suất Labgruppen DSP 4 Kênh
  • D 10:4L Amply Công Suất Labgruppen DSP 4 Kênh
  • NLB 60E Phụ Kiện Amply Lab.Gruppen

    252.000.000
    Chờ đặt hàng
    • Miễn phí giao hàng toàn quốc

    Liên Hệ

    Hỗ trợ mua sản phẩm

    Gọi hotline 0799 030088 để biết thêm chi tiết sản phẩm.

    Những câu hỏi thường gặp

    Công ty có miễn phí giao hàng không?

    Có, hiện nay Hoàng Bảo Khoa miễn phí giao hàng toàn quốc cho tất cả các sản phẩm.

    D 200:4L có giảm giá không?

    Giá hôm nay đã được Hoàng Bảo Khoa giảm trực tiếp rồi, bạn có thể check giá tháng trước và bây giờ nhé.

    D 200:4L thuộc thương hiệu nào?

    D 200:4L thuộc thương hiệu Lab Gruppen. Lab Gruppen, amply kết hợp DSP (Đẩy công suất - Power Amplifier) từ Thụy Điền

    Thời gian bảo hành D 200:4L là bao lâu?

    Hiện sản phẩm D 200:4L được bảo hành 1 năm.

    Công ty có hỗ trợ trả góp không?

    Có, hiện nay Hoàng Bảo Khoa đang hỗ trợ trả góp 0% nhé. Mời bạn xem chương trình tại đây: Ưu đãi trả góp 0% lãi suất.

    Chia sẻ