TCS122/94 Loa Turbosound ATHENS

Mã sản phẩm: TCS122/94      8.785     
4.67/5 trong 3 lượt 
Turbosound
  • TCS122/94
  • TCS122/94
  • TCS122/94
  • TCS122/94
TCS122/94
TCS122/94
TCS122/94
TCS122/94

17.490.000
  • Miễn phí giao hàng toàn quốc


Documentation

·  Product Information Document, English

·  Quick Start Guide, English

SPEC

  • Arrayable 2 way full range loudspeaker for installation applications
  • Rotatable Dendritic waveguide with 90° H x 40° V dispersion
  • 600 Watts continuous, 2,400 Watts peak power
  • Glass fibre loaded 12" low frequency driver with aluminium voice coil for improved transient response
  • Titanium dome 1.4" neodymium motor compression driver
  • Multiple array configurations for extended coverage
  • Switchable passive/bi-amp operation for flexibility of use
  • Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
  • Multiple internal rigging points allow bracket mount and suspension in any orientation
  • 15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
  • Architecturally styled powder coated perforated steel mesh grille
  • Neutrik speakON* NL4 and barrier strip connectors
  • 1-Year Warranty Program*
  • Designed and engineered in the U.K.
ATHENS TCS122/94
ATHENS TCS122/94

The 2 way full range TCS122/94 is a switchable passive/bi-amp 12" 2,400 Watt arrayable loudspeaker system that is ideally suited for a wide range of speech and music sound reinforcement applications. The TCS122/94 is designed to work in conjunction with Turbosound loudspeaker management systems, providing optimal FOH performance, as well as offering considerable flexibility to readily adapt to varying venue requirements.

The TCS122/94 arrayable loudspeaker features a glass fibre loaded 12" low frequency driver with inside/outside wound coil with low mass voice coil for improved transient response, and a titanium dome 1.4" neodymium motor compression driver mounted on a 90° horizontal by 40° vertical Dendritic waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch. The rear panel connector plate carries Neutrik speakON* NL4 and barrier strip connectors for input and link connections to additional enclosures.

Turbosound’s proprietary HF Dendritic waveguide features multiple hornlets with identical path lengths, which are designed to provide a flat constant-phase wavefront with a 90° horizontal by 40° vertical dispersion pattern. When the waveguide is rotated 90° from the standard position, a 40° horizontal by 90° vertical dispersion is achieved, making the TCS122/94 ideal for an even broader range of applications.

Finished in a highly durable semi matt black paint, the cabinet is constructed from 15 mm (5⁄8") birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Internal M10 threaded rigging points are provided for suspension in any orientation, or mounting with dedicated brackets – available separately. A dedicated range of fly plates and coupler kits are also available separately for constructing tightly packed custom full-range and subwoofer enclosure arrays for aesthetically pleasing and venue specific coverage requirements.

Architecture & Engineering Specifications

The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 12" (312 mm) LF driver and one 1.4" (36 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 50 Hz to 18 kHz and within -10 dB from 45 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 90° H x 40° V, rotatable. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF: 75 Watts continuous, 300 Watts peak, LF: 600 Watts continuous, 2,400 Watts peak; passive: 600 Watts continuous, 2,400 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 96 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be HF: 134 dB, LF: 130 dB; passive: 130 dB. Dimensions: 834 mm high x 399 mm wide x 425 mm deep (32.8" x 15.7" x 16.7"). Net weight: 26.5 kg (58.4 lbs). The loudspeaker system shall be the Turbosound TCS122/94. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.

 
Specification
 
System
Frequency Response 50 Hz - 18 kHz ±3 dB
45 Hz - 20 kHz -10 dB
Nominal Dispersion 90° H x 60° V @ -6 dB points, rotatable
Directivity Factor (Q) 8.7
Directivity Index (DI) 9.4
Power Handling (IEC)  
Sensitivity 96 dB (1 W @ 1 m)
Maximum SPL  
Impedance  
Crossover Type Passive / bi-amp, switchable
Components 1 x 12" (312 mm) LF driver
1 x 1.4" (36 mm) HF compression driver
Enclosure
Connectors 1 x Neutrik speakON* NL4
1 x barrier strip terminals
Wiring  
Dimensions (H x W x D) 834 x 399 x 425 mm (32.8 x 15.7 x 16.7")
Net Weight 26.5 kg (58.4 lbs)
Construction 15 mm (5/8") birch plywood
Finish Semi matt black paint
Grille Powder coated perforated steel
Flying Hardware M10 x 9, M8 X 8 points
Accessories
  TCS122-FP (WH) fly plate kit for TCS122
TCS-FK1 (WH) inter-cabinet coupler kit for TCS122 or TCS152
TCS-FK2 (WH) inter-cabinet coupler kit for TCS115B with TCS122 or TCS152

17.490.000
  • Miễn phí giao hàng toàn quốc
0799 030 088 - HCM
0963 400 091 - HCM
0909 477 788 - HCM
0898 303 000 - Kỹ Thuật
0944 680 640 - Rạch Giá
0982 031 102 - Nha Trang

Hỗ trợ mua sản phẩm

Gọi hotline 0799 030088 để biết thêm chi tiết sản phẩm.